Support Representative to the site or by authorizing the Customer to return the defective accessory or instrument to Varian or to send it to a designated service facility. The Customer shall be responsible for loss or damage in transit and shall prepay shipping cost.
Spare Parts Availability Service Availability It is the policy of Varian to provide operational spare parts for any instrument and Varian provides a variety of major accessory for a period of five (5) years after shipment of the final production services to support its customers run of that instrument.
If this manual is not in your nature language and if you have problems understanding the text, we advise you to contact your Varian office for assistance. Varian cannot accept responsibility for any damage or injury caused by misunderstanding of the information in this manual.
Page 6
Indicates instrument contains parts that can be damaged by Static discharge electrostatic discharge. Take care for proper grounding Warning before handling. Touching this item may result in damage to the instrument Do not touch or personal injury. Page: 2 User manual CP-4900 Micro-GC Power Supply Varian, Inc.
This instrument is designed for use in combination with the CP-4900 Micro-GC. If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.
Page 8
10. Never try to repair or replace any component that is not described in this manual without the assistance of a Varian service engineer. Unauthorized repairs or modifications will result in rejection of warranty claims.
Congratulations and thank you for purchasing the Varian, Inc. CP-4900 Micro- GC Power Supply used in combination with the CP-4900 Micro-GC. This Power Supply must only be used in combination with the CP-4900 Micro- GC model. This Power Supply is tailored to meet the power needs of the CP-4900 Micro-GC model.
Power Supply input 80 Vac to 130 Vac or 180 Vac to 260 Vac (autoranging) 47 to 63 Hz 130W output 12.0 Vdc Mains cable with plug 220 Vac Mains cable with plug 110 Vac Mains cable with plug 240 Vac Page: 2 User manual CP-4900 Micro-GC Power Supply Varian, Inc.
CP-4900 Micro-GC Power Supply and the peripheral instruments which may be installed near it. Allow 10-20 cm of space at the sides and rear of the CP-4900 Micro- GC Power Supply to permit free air circulation.
The mains network should be properly grounded. Installation Category (overvoltage category): II Power The Micro-GC CP-4900 requires 12V Vdc, 130 W. For more details refer to the User manual Micro-GC CP-4900 Power Supply (CP501265). Page: 4 User manual CP-4900 Micro-GC Power Supply...
Introduction and initial operation Setting up the Power Supply 1. Check if the Power Supply is corresponding with the CP-4900 Micro-GC (see table below). Micro-GC Mains voltage Power Supply Cables Power Supply CP740159 Check power connector 230 VAC With mains cable CP72103...
Be careful not to get water on the electronics components. • Do not use compressed air to clean. Disposal instructions Disposal of the Power Supply must be carried out in accordance with all (environmental) regulations applicable in your country. Page: 6 User manual CP-4900 Micro-GC Power Supply Varian, Inc.
TUV file No. S9954867 Approved RFI/EMC standard In compliance with CISPR22 (EN55022), Class B and FCC class B Dimensions 178 x 95 x 63.5 mm (LxWxH) Weight 1 kg approx. Varian, Inc User manual CP-4900 Micro-GC Power Supply Page: 7...