Invalid_Stp_Frame (Id: 04400419); Relay_Mpls_Frame (Id: 04400420); Dropped_Mpls_Packet (Id: 04400421) - D-Link DFL-260E Log Reference Manual

Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.61.10. invalid_stp_frame (ID: 04400419)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.61.11. relay_mpls_frame (ID: 04400420)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.61.12. dropped_mpls_packet (ID: 04400421)

Dropping STP frame from <recvif>
An incoming STP frame has been dropped.
drop
None.
1
recvif
WARNING
Incoming STP frame from <recvif> dropped. Reason: <reason>
An incoming Spanning-Tree frame has been dropped since it is
either malformed or its type is unknown. Supported Spanning-Tree
versions are STP, RSTP, MSTP and PVST+.
drop
If the frame format is invalid, locate the unit which is sending the
malformed frame.
1
recvif
reason
INFORMATIONAL
Forwarding MPLS packet from <recvif>.
An incoming MPLS packet has been forwarded through the
gateway. [destif] indicates if it was forwarded to an ultimate
destination or if it was broadcasted to over all interfaces in the
switch group.
allow
None.
1
recvif
destif
617
Chapter 2: Log Message Reference