Enet_Hw_Sender_Multicast (Id: 04400416); Relay_Stp_Frame (Id: 04400417); Dropped_Stp_Frame (Id: 04400418) - D-Link DFL-260E Log Reference Manual

Explanation
Gateway Action
Recommended Action
Revision
Context Parameters

2.61.7. enet_hw_sender_multicast (ID: 04400416)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Context Parameters

2.61.8. relay_stp_frame (ID: 04400417)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.61.9. dropped_stp_frame (ID: 04400418)

Default Severity
The Ethernet hardware sender address is a multicast address. The
packet will be rewritten with the hardware sender address of the
forwarding interface.
rewrite
None.
1
Rule Name
Packet Buffer
WARNING
Ethernet hardware sender is a multicast address. Dropping.
The Ethernet hardware sender address is a multicast address. The
packet will be dropped.
drop
Investigate if there are equipment sending packets using a multicast
address as sender MAC address. If there are, try to change the
behaviour of that equipment.
1
Rule Name
Packet Buffer
INFORMATIONAL
Relaying STP frame from <recvif> to switched interfaces
An incoming STP frame has been relayed to all switched interfaces in
the same switch route as [recif].
allow
None.
1
recvif
INFORMATIONAL
616
Chapter 2: Log Message Reference