2.45. Realtimemonitor; Value_Above_High_Threshold (Id: 054Xxxxx); Value_Below_Low_Threshold (Id: 054Xxxxx) - D-Link DFL-260E Log Reference Manual

2.45. REALTIMEMONITOR

These log messages refer to the REALTIMEMONITOR (Real-time monitor events) category.

2.45.1. value_above_high_threshold (ID: 054xxxxx)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.45.2. value_below_low_threshold (ID: 054xxxxx)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Note
The log message IDs in this category are assigned dynamically based on the realtime
monitor configuration. The variable part of the ID (indicated by x below) corresponds to
the assigned ID of the realtime monitor rule that triggered, e.g. assigned ID 1 results in
log message ID 05400001 and assigned ID 12 becomes log message ID 05400012.
INFORMATIONAL
Firewall Monitoring. Current uptime: <uptime>. The value of:
<name> is above the high threshold High threshold: <threshold>
Current mean of <numbersamples>: <currentvalue>.
High threshold passed.
None
None.
1
uptime
name
threshold
numbersamples
currentvalue
INFORMATIONAL
Firewall Monitoring. Current uptime: <uptime>. The value of:
<name> is below the low threshold Low threshold: <threshold>
Current mean of <numbersamples>: <currentvalue>.
Low threshold passed.
None
None.
1
uptime
name
threshold
numbersamples
currentvalue
Chapter 2: Log Message Reference
521