D-Link DFL-260E Log Reference Manual page 40

[origsent] The number of bytes sent by the originator in this connection. Valid if the
connection is closing or closed.
[termsent] The number of bytes sent by the terminator in this connection. Valid if the
connection is closing or closed.
IDP
Specifies the name and a description of the signature that triggered this event.
Note
For IDP log messages an additional log receiver, an SMTP log receiver, can be
configured. This information is only sent to log receives of that kind, and not included in
the Syslog format.
Dropped Fragments
Specifies detailed information about dropped fragments in a packet.
Rule Name
Specifies the name of the rule that was used when this event was triggered.
rule The name of the rule.
Rule Information
Additional information about the rule that was used when this event was triggered. Certain
parameters may or may not be included, depending on the type of rule. For example, the name
of an authenticated user is only included if this rule contains network objects that has user
authentication information in them.
rule The name of the rule.
[satsrcrule] The name of the SAT source rule. Valid if the rule action is SAT.
[satdestrule] The name of the SAT destination rule. Valid if the rule action is SAT.
[srcusername] The name of the authenticated user in the source network object. Valid if the
source network object has user authentication information.
[destusername] The name of the authenticated user in the destination network object. Valid if
the destination network object has user authentication information.
User Authentication
Additional information about a user authentication event.
40
Chapter 1: Introduction