Invalid_Url_Format (Id: 00200101); Allow_Unknown_Protocol (Id: 00200102) - D-Link DFL-260E Log Reference Manual

Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.1.6. invalid_url_format (ID: 00200101)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters

2.1.7. allow_unknown_protocol (ID: 00200102)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters
Context Parameters
close
Research the source of this and try to find out why the client is
sending an invalid header.
1
algname
ALG Module Name
ALG Session ID
ERROR
HTTPALG: Failed to parse the URL requested by the client: <reason>.
ALG name: <algname>.
The unit failed parsing the requested URL. The reason for this is
problaby because the requested URL has an invalid format, or it
contains invalid UTF8 formatted characters.
close
Make sure that the requested URL is formatted correctly.
1
reason
algname
ALG Module Name
ALG Session ID
NOTICE
Allowing unknown protocol. ALG name: <algname>.
Invalid protocol data received from the client. The connection will
be allowed to pass through without inspection according to the
configuration.
allow
If unknown protocols should be blocked, change the configuration.
1
algname
ALG Module Name
ALG Session ID
49
Chapter 2: Log Message Reference