Display Functions - Miele HG05 Operating Instructions Manual

Display functions

General information
The display is used to select or set the
following:
– The program
– The FlexiTimer (Delay Start)
– The Settings menu
The display can show the following:
– The program stage
– The estimated time left for the pro-
gram to run
– Any relevant fault messages and in-
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
To switch the dishwasher back on
again, press the  button.
Guide to the dishwasher
Settings menu
The Settings menu is used to adapt the
electronic module of the dishwasher to
changing requirements. See the "Set-
tings menu" chapter for more informa-
tion on accessing the settings menu.
The arrows in the display indicate addi-
tional options. You can use the  ar-
row buttons next to the display, as ap-
propriate, to select these additional op-
tions.
The OK button is used to confirm a
message or setting and also to move to
the next menu or another level.
The option which is selected will have a
check  next to it.
To exit a sub-menu, use the  arrow
buttons to select the
the display and confirm your choice
with OK.
If you do not press any of the buttons
for several seconds, the display with re-
turn to the previous level. You may need
to enter your settings again.
Back  option in
17