Pre-Rinse; Brightness; Volume - Miele HG05 Operating Instructions Manual

Pre-Rinse

You can use this function to remove
easily loosened food residues in the
program selected.
Once activated, this function will be
carried out with all programs until you
deactivate it.
 Select the setting you want and con-
firm with OK.

Brightness

There are seven different display bright-
ness settings.
 Select the brightness you want and
confirm this with OK.

Volume

A sequence of buzzer tones will sound
at the end of the program or if there is a
fault as long as the buzzer has been ac-
tivated.
Buzzer in the event of a fault
The buzzer in the event of a fault will
sound four times at intervals with a
short pause between each set of tones.
The buzzer which sounds when there
is a fault cannot be deactivated.
Buzzer at the end of a program
The buzzer at the end of a program will
sound four times at intervals with a
short pause between each set of tones.
The volume of the buzzer which sounds
at the end of the program can be set to
one of seven stages. If no volume is se-
lected, the buzzer is switched off.
 Select the
Buzzer tone
 Use the  arrow buttons to set the
volume required and confirm your se-
lection with the OK button.
Keypad tone
An buzzer tone sounds each time a but-
ton is pressed.
The volume of the keypad tone can be
set to one of seven stages. If no volume
is selected, the keypad tone is switched
off.
 Use the  arrow buttons to set the
volume required and confirm your se-
lection with the OK button.
Settings menu
option.
67