Miele HG05 Operating Instructions Manual page 57

EcoStart
The EcoStart function allows you to take
advantage of time variable economy
rates of electricity. Before you can use
this option, you must set up to three
electricity rate time zones (see "Settings
menu - EcoStart").
You then set the latest time at which the
program selected should end.
The dishwasher will start automatically
in the cheapest rate zone within the
time set.
 Use the  arrow buttons to set the
hour and confirm with OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the  arrow sensors to set the
minutes and confirm with OK.
The estimated start time for the pro-
gram selected will appear in the display.
The  indicator light will come on.
 Close the door within four seconds.
The selected program will start auto-
matically during the most cost effective
time zone. It will finish at the latest by
the set finish time.
Changing or deleting set times
You can change the set times or the
program before the start time in the dis-
play is reached.
 Open the door.
 Press the  button.
 Use the  arrow buttons to select
the setting you want to change and
confirm with OK.
 Use the  arrow buttons to select
the or
Change Delete
confirm with OK.
After confirming the
you can change the set time.
After confirming the
program duration will appear in the dis-
play for the selected program.
The  indicator light will go out and the
indicator light for the selected program
will come on.
 Start the program by closing the
door.
If you open the door for more than
four seconds before the start time is
reached, the message
appears in the display. Press the OK
button and close the door within four
seconds to restart the FlexiTimer.
Options
function and
function,
Change
function, the
Delete
Continue with OK
57