Product Setup - D-Link DWR-921E Quick Installation Manual

PrODuCT SETuP

Zero CoNFiGurATioN seTuP
Ensure that your DWR-921E Wireless N300 4G LTE Router is powered off before performing the
steps below.
SIM card
Router
Modem
Router
PC
Modem
Router
PC
Modem
Router
WELCOME TO THE D-LINK SETUP WIZARD
DWr-921e
Step 1:
Insert a standard USIM card into the SIM card slot on the bottom of
the DWR-921E with the gold contacts facing toward the back of the
router.
Step 2:
Insert your Ethernet cable into the WAN port on the back of the
router.
Note: The 4G connection may be configured as a backup WAN
connection. Once a backup is configured, if Ethernet WAN Internet
connectivity is lost, the router will automatically fallback to using the
backup 4G connection.
Step 3:
Insert the Ethernet cable into a LAN port on the back of the
DWR-921E Wireless N300 4G LTE Router, and an available
Ethernet port on the computer you will use to configure the unit.
Step 4:
Connect the power adapter to the power input on the back panel of
your DWR-921E Wireless N300 4G LTE Router, and plug the other
end of the power adapter into a wall outlet or power strip.
The Power LED will light up to indicate that power has been supplied
to the router.
Step 5:
To configure the DWR-921E Wireless N300 4G LTE Router:
Open a web browser window and enter 192.168.0.1 into the address
bar.
Enter admin for the username and the default password is blank.
The configuration home page will appear. For more information,
please see the user manual for details on how to set up the
DWR-921E.
3