Product Setup; Web-Based Setup - D-Link DIR-803 Quick Installation Manual

PRODUCT SETUP

WEB-BASED SETUP

PC
Router
Modem
Modem
Router
RESET
4 3 LAN 2 1 INTERNET
PC
Modem
Router
RESET
4 3 LAN 2 1 INTERNET
WELCOME TO THE D-LINK SETUP WIZARD
DIR-803
Step 1
Position your DIR-803 near your Internet-connected modem and
PC. Keep the router in an open area for better wireless coverage.
Step 2
Unplug the modem Ethernet cable connected to your computer and
plug it into the port labeled 'INTERNET' on the router.
Connect the supplied power adapter to the router and a power
outlet, then verify that the power LED is on.
Step 3
Plug one end of the supplied Ethernet cable into the port labeled '1'
on the back of the router, and the other end into the Ethernet port on
your computer.
To set up the DIR-803 through Wi-Fi, go to your computer or mobile
device's Wi-Fi settings and select the network (ex: dlink-A8FA).
Enter Wi-Fi password (ex: akbdj19368) on the included Wi-Fi
Configuration Note.
Step 4
Open a browser on the connected computer. If you are not
automatically directed to the D-Link Setup Wizard, go to
'http://dlinkrouter.local./' and follow the onscreen instructions to
configure your DIR-803. Use 'Admin' as your username and leave
the password blank to configure manually.
3