Table of Contents
Advertisement
Basic Connections
Step 4: Connecting to a
Progressive Scan TV
(optional)
IMPORTANT!
The progressive scan video quality is
only possible when using Y Pb Pr and
a progressive scan TV is required.
1
Use the component video cables (red/
blue / green - not supplied) to connect the
DVD system's Y Pb Pr sockets to the
corresponding component video input
sockets (or labelled as Y Pb/Cb Pr/Cr or
YUV) on the TV.
2
To hear the TV channels through this
DVD system, use an audio cables (white/
red - supplied) to connect AUDIO-TV
IN sockets to the corresponding AUDIO
OUT sockets on the TV.
3
Proceed to page 20 for detailed
Progressive Scan set up.
12
001-051-hts5310S-51_Eng4
(continued)
Step 5: Connecting FM/MW
1
Connect the supplied MW loop antenna
to the MW socket. Place the MW loop
antenna on a shelf, or attach it to a stand
or wall.
2
Connect the supplied FM antenna to the
FM socket. Extend the FM antenna and
fix its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible
from your TV, VCR or other radiation source
to prevent unwanted interference.
12
antennas
fix the claw
into the slot
➠
MW
1
antenna
Pr
Y
Pb
19/09/05, 6:00 PM
FM
antenna
2
Advertisement
Table of Contents
