Table of Contents
Advertisement
Getting Started
Step 4: Setting language
preferences
You can select your preferred language
settings so that this DVD system will
automatically switch to the language for
you whenever you load a disc. If the
language selected is not available on the
disc, the disc's default language will be
used instead.
The OSD (On-Screen Display) language
for the system menu will remain as you
set it, regardless of the default and
optional disc languages.
On-screen display (OSD) language
1
In disc mode, press SETUP.
2
Press 2 to select { General Setup Page }.
3
Use 34 keys to highlight { OSD
Language }, then press 2.
4
Use 34 keys to select a language and
press OK to confirm.
TIPS:
The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP.
22
001-051-hts5310S-51_Eng4
(continued)
Audio, Subtitle and Disc menu
languages
1
Press Ç twice to stop playback (if any),
then press SETUP.
2
Press 2 repeatedly to select
{ Preference Page }.
3
Use 34 keys to highlight one of the
options below, then press 2.
– { Audio } (disc's soundtrack)
– { Subtitle } (disc's subtitles)
– { Disc Menu } (disc's menu)
4
Use 34 keys to select a language and
press OK to confirm.
If the language you want is not in
the list, then select { Others }.
Use the numeric keypad (0-9) on the
remote to enter the 4-digit language code
'XXXX' (see page 5) and press OK to
confirm.
5
Repeat steps
22
3
4
~
for other settings.
19/09/05, 6:01 PM
Advertisement
Table of Contents
