Table of Contents
Advertisement
Connections
Step 6: Connecting a
Progressive ScanTV
IMPORTANT!
– The progressive scan video quality
is only available when using Y Pb Pr
connection and a progressive scan TV
is required.
– DO NOT connect both SCART
and Y Pb Pr to a TV, it may affect
the picture quality.
Using Component Video jacks
(Y Pb Pr)
1
Use the component video cables (red/
blue/ green - not supplied) to connect the
DVD system's Y Pb Pr jacks to the
corresponding component video input
jacks (or labelled as Y Pb/Cb Pr/Cr or
YUV) on the TV.
2
Change the component video setting
manually to YUV, see page 19.
3
Activate the progressive scan function,
see page 34.
12
001-047-LX85-22-Engfinal
Step 7: Connecting FM/MW
1
Connect the supplied MW loop antenna
to the MW jack. Place the MW loop
antenna on a shelf or attach it to a stand
or wall.
2
Connect the supplied FM antenna to the
FM jack. Extend the FM antenna and fix
its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible
from your TV, VCR or other radiation source
to prevent unwanted interference.
12
antennas
fix the claw
into the slot
➠
MW loop
antenna
1
3139 115 23481
7/8/04, 10:14 AM
FM
antenna
2
Hide quick links:
Advertisement
Table of Contents
