Keurig K200 SERIES Use & Care Manual page 7

BREW YOUR FIRST CUP
1. The green Power Light will illuminate to
indicate the brewer is powered on. Place
a cup or mug on the Drip Tray Plate.
3. Place a K-Cup® pod in the K-Cup®
Pod Holder. Lower the Handle completely
to close the Lid.
CAUTION: There are two sharp needles that puncture the
K-Cup® pod, one above the K-Cup® Pod Holder and the other in
the bottom of the K-Cup® Pod Holder. To avoid risk of injury, do
not put your fingers in the K-Cup® Pod Holder.
2. Lift the Handle and the K-Cup® pod
Holder will open toward you. Select
a K-Cup® pod.
NOTE: Do not remove the foil lid or puncture the K-Cup® pod.
4. Select your brew size: The Small Cup
choice will yield a 5.25 oz. serving, the
Small Mug will yield a 7.25 oz. serving and
the Large Mug will yield a 9.25 oz. serving.
The blue Brew Button you choose will
remain illuminated while brewing.
NOTE: If you do not push a Brew Button in 60 seconds, the
Brew Buttons will be disabled to prevent accidental activation.
Re-activate the Brew Buttons by lifting and lowering the
Handle completely.
CAUTION: There is extremely hot water in the K-Cup® Pod Holder
during the brew process. To avoid risk of injury, do not lift the
Handle or open the K-Cup® Pod Assembly Housing during the
brew process.
12
5. There may be a short pause before the
brewing process begins. The entire brew
process lasts for approximately 1 minute
and ends with a burst of air to remove all
liquid from the K-Cup® pod Lift the Handle
and dispose of the used K-Cup® pod.
CAUTION: K-Cup® pod will be hot.
7. The red Heating Light may be illuminated
as the water is heated for the next brew
cycle. The brewer will be ready for use in
approximately 15 seconds.
NOTE: During this period, your brewer will prepare for the next
brew. The pump may make a vibrating sound. This is normal.
1 | LET'S GET BREWING!
6. Enjoy your first cup of gourmet
coffee, tea, or hot cocoa from your
Keurig® brewer!
13