Enable Port Forwarding
If your computer is hosting a server, you can enable port forwarding so that other users can
access the server.
To enable port forwarding:
1.
From a computer or wireless device that is connected to your network, launch an
Internet browser.
2.
Enter http://netgear.aircard or http://192.168.1.1.
Your device might have a different web page address. To get the web page address for
your device, tap Settings > More > Device Information > AC790 Manager or look at the
label underneath the device battery.
A login screen displays.
3.
Enter the administrator login password.
The default password is admin. The password is case-sensitive.
The Home screen displays.
4.
Select Settings > Router > Port Forwarding.
5.
Select the Enable radio button.
The Port Forwarding table displays.
Incoming traffic is forwarded to specific ports and devices on your network using their
local IP addresses.
Note:
Port forwarding creates a security risk. When not required, disable port
forwarding.
6.
Enter the following port forwarding information:
•
Label. Enter a descriptive name.
•
IP. Enter the IP address of a connected device.
•
Port. Enter the port number that the application uses.
•
Protocol. If you are unsure, select TCP/IP.
AirCard 790S Mobile Hotspot
Advanced Settings
82