Table of Contents
Advertisement
Step 5: Open the UltraBookIIi back and side panels.
Step 5 continued.
Step 5 shows the back panel. Although the UltraBookIIi
is completely self-contained, the back panel provides
access for connecting the workstation to a wide variety
of external devices, including Ethernet networks. Lower
the cover plate and connect the external device to the
appropriate connector. For serial or parallel
connections, use the supplied I/O break-out cable. For
Ultra/Fast-Wide SCSI connections, use the SCSI port
shown in Step 5. See Chapter 2 for more on connections.
Turn on all external devices, then turn on your
UltraBookIIi, as shown in Step 6.
2–4
UltraBookIIi User Guide
Advertisement
Table of Contents
