To Install The Battery Pack - Intel UltraBookIIi User Manual

Using Batteries
UltraBookIIi includes three device bays,
which may be occupied by one of several
devices. If the device bay on the right side of
the unit (the same side as the PCMCIA and
parallel and serial ports) is occupied by a
hard disk drive, you will not be able to run
UltraBookIIi on battery power.

To install the battery pack:

The battery can be installed with the
UltraBookIIi powered on or off.
Insert the battery pack in the bay. Push in until you
hear it click into place. The battery bay is located in
the same side of the unit as the PCMCIA and parallel
and serial ports.
Figure 3-3 Installing the Battery Pack
To remove the battery pack:
1. Shut down the UltraBookIIi according to
the instructions on page 3-10.
2. Turn the UltraBookIIi over.
UltraBookIIi User Guide 3–5