Safety precautions Please only use the power adapter in the accessories box to charge the internal battery of the system. Battery is not User-serviceable, do not attempt to remove battery. iii. Do NOT remove, disassemble, puncture, drop, crush the internal battery pack or expose to fire or temperatures above 100℃.
Contents 1 Hardware setup........................5 1.1 Top View ...........................5 1.2 Bottom View ........................6 1.3 Right side ..........................7 1.4 Left Side..........................8 2 Using your Notebook PC ....................9 2.1 Getting started........................9 2.2 Gestures for the touch screen ....................9 2.3 Using the keyboard ......................11 2.4 ...
1 Hardware setup Getting to know the model: HSBUB-SDS 1.1 Top View 1) Microphone The built-in microphone can be used for video conferencing, voice narrations, or simple audio recording. 2) Camera indicator The camera indicator lights up when the built-in camera is in use. 3) Camera The built-in camera allows you to take pictures or record videos.
Photos, videos, and other multimedia files. Note: HSBUB-SDS is equipped with touch-enabled panel, allowing you to operate using touch gestures. 6) Number Lock indicator This indicator lights up when the number lock function is activated. 7) Power button (with power LED indicator) Press the power button can turn on/off Notebook PC.
1.3 Right side 1) SIM Card port The standard SIM card can be plugged into this port for the built-in 3G module. 2) Mini HDMI port This port is for a High-Defnition Multimedia Interface (HDMI) connector. 3) USB3.0 port This Universal Serial Bus 3.0 (USB 3.0) port provides a transfer rate of up to 5 Gbit/s and is backward compatible to USB 2.0 4) Power (DC) input port with two color battery charge indicator Insert the bundled power adapter into this port to charge the battery pack and supply...
Power adapter information: Chicony A12-045N2A - Input : 100~240V /1.3A , 50~60Hz - output: 19V / 2.37A, 45W Delta ADP-45BE AA - Input : 100~240V /1.3A , 50~60Hz - output: 20V / 2.25A, 45W 1.4 Left Side 1) Headphone/microphone combo jack port This port allows you to connect your Notebook PC’...
2 Using your Notebook PC 2.1 Getting started 1) Connect the AC power cord to the AC/DC adapter, Plug the AC power adapter into a 100V~240V power source. Connect the DC power connector into your Notebook PC’s power (DC) input. 2) Lift to open the display panel.
2.3 Using the keyboard The function keys on your Notebook PC’s keyboard can trigger the following commands: Function keys Expectation Fn+F1 Puts the Notebook PC into Sleep mode Fn+F2 Display switch Fn+F3 Display brightness Increase Fn+F4 Display brightness Decrease Fn+F5 Turns Widi on/off Fn+F6 Turns the volume mute Fn+F7 Turns the volume down Fn+F8 Turns the volume up Fn+F9 Keyboard brightness Decrease Fn+F10 Keyboard brightness Increase Fn+F11 Number Lock ...
Answer: press the power button for more than 4s to force the system shut down. 2. How to update BIOS in Windows8 ? Answer: a. Get the tool “WinFlashInstaller” from http://clientdownload.intel.com/SitePages/Sharkbay%20ULT.aspx The file should contain: WinFlash_Installer.exe, please install it on your Notebook PC. b. Get the BIOS “HSB_BIOS_xxxx” from : http://clientdownload.intel.com/SitePages/Sharkbay%20ULT.aspx.
4 Appendices FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 14
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. French: Cet appareil radio est conforme au CNR-210 d’Industrie Canada. L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt à...