Matrix Electrónica – MTX‐Router‐Titan
"SET RELAY" command
http://www.mtxm2m.com
Subject to changes without prior notice
modbusRegister:
registerValue:
commandWrite:
commands 3 or 4 can be used. If not indicated, the Modbus command 3 will
be used.
Examples:
MW[1,10,100]
Writes the value "100" in register 10 of the Modbus device with address 1,
using the Modbus writing command 3.
MW[1,10,100,4]
Writes the value "100" in register 10 of the Modbus device with address 1,
using the Modbus writing command 4.
MW[192.168.1.20:502,10,100]
Writes the value "100" in reegister 10 of the Modbus TCP device with IP
address 192.168.1.20 and TCP port 502 using the Modbus writing command
3.
MW[1,10,100,4]
Writes the value "100" in reegister 10 of the Modbus TCP device with IP
address 192.168.1.20 and TCP port 502 using the Modbus writing command
4.
Syntax:
SR[idRelay, relayValue]
Description:
Activates or deactivates an internal relay of the Titan device. Can be used
on the fields ACTION1 and ACTION2.
Parameters:
address of the Modbus device register to be written
value to be written in the register
OPTIONAL PARAMETER. The Modbus writing
User Manual ‐ Rel3.00.3.09
Page 84