Emulation Software For Serial Ports: Vspe Quick Quide To The Emulation Software For Serial Ports - Titan MTX-Router--3G-mini User Manual

Matrix Electrónica – MTX‐Router‐Titan
Emulation software for serial ports: VSPE
Quick quide to the emulation software for serial ports.
Introduction:
One of the most used software nowadays to emulate serial ports is VSPE. It is a free piece of
software for 32 bit Windows Operating Systems and a pay service for 64 bit platforms.
Emulation software for serial ports to TCP/IP must be used if you have old software for
connecting serial devices that only allows you to connect to these devices via a COM serial port.
This software allows you to create virtual COMs (COM1, COM2, COM3, etc.) on your PC that, in
reality, are directed to a specific IP address or TCP port.
You can download the software from the following link:
http://www.eterlogic.com/downloads/SetupVSPE.zip
Usage example:
The following steps show how to configure a virtual COM port that directs to a specific IP address or
TCP port.
1.- Menu: Device > Create
http://www.mtxm2m.com
Subject to changes without prior notice
User Manual ‐ Rel3.00.3.09
Page 191