Wi-Fi; 1- Wifi >> Basic Settings - Titan MTX-Router--3G-mini User Manual

Matrix Electrónica – MTX‐Router‐Titan

4.3- Wi-Fi

The "Wi-Fi" configuration section refers to the Wi-Fi network configuration. By using a Wi-Fi connection,
you can provide Wi-Fi enabled devices with access to the Internet.
4.3.1- Wifi >> Basic Settings
This section explains the basic configuration parameters for a Wi-Fi connection.

Enabled: This parameter activates the Wi-Fi interface for the Titan router.

Wifi mode: This parameter allows you to select either "Wifi Access Point" or "Wifi Client" as
the work mode. "Wifi Access Point" is recommended if you wish to use the Titan router to
provide Internet access to Wi-Fi enabled devices using 3G. "Wifi Client" is recommended if you
wish to use an existing Wi-Fi infrastructure (for example, the company's ADSL/Cable
connection) to provide Internet Access.

Wifi SSID:
Titan router; in "Wifi Client" mode this indicates the SSID that the Titan router will connect to).

Security:
recommended.

KEY:

IP Mode:
whether the IP address should be taken using DHCP.

IP Address: This parameter indicates the IP address for the Wi-Fi interface. The default value
is 192.168.2.1

Subnet Mask:

DNS1:

DNS2:

IP Gateway:
used when the local IP address is static.

Internet Access:
a Wi-Fi enabled device.

LAN Access:
to the router's Ethernet port from a Wi-Fi device.
http://www.mtxm2m.com
Subject to changes without prior notice
Public SSID (in "Wifi Access Point" mode this indicates the SSID created by the
This parameter allows you to specify the Wi-Fi security mode. WPA2 is
This parameter specifies the Wi-Fi password that is necessary for WPA2 mode.
In "Wifi Client" mode this specifies if a local static IP address is to be used or
This parameter indicates the subnet mask for the Wi-Fi interface.
This parameter indicates the main DNS server.
This parameter indicates the secondary DNS server.
In "Wifi client" mode, this parameter allows you to specify the Gateway to be
This parameter should be activated in order to connect to the Internet from
This parameter should be activated in order to connect to devices connected
User Manual ‐ Rel3.00.3.09
Page 24