Lan; 1- Lan >> Basic Settings - Titan MTX-Router--3G-mini User Manual

Matrix Electrónica – MTX‐Router‐Titan

4.2- LAN

The "LAN" configuration section refers to the Ethernet configuration.
4.2.1- LAN >> Basic Settings
This section allows you to configure the basic network parameters for an Ethernet connection.

Static IP: a static IP address will be assigned.

IP Address:

IP Subnet Mask:

DNS1:

DNS2:

IP Gateway: gateway IP address. Leave this in blank if you are going to use 2G/3G networks.
For example, if would be useful if you wanted to provide Internet connectivity to Wi-Fi devices,
but redirecting the output towards the IP address of an ADSL router instead of via 2G/3G.
Additional Notes.
- Once the configuration is finished, click "SAVE CONFIG" to save the changes. Remember
that the router should be restarted for the changes to take effect.
http://www.mtxm2m.com
Subject to changes without prior notice
a local IP address of the Ethernet interface (by default 192.168.1.2)
Subnet mask
main DNS server
secondary DNS server
User Manual ‐ Rel3.00.3.09
Page 22