Matrix Electrónica – MTX‐Router‐Titan
4.7.9- Other >> Time Server (NTP)
The router has a real time clock that allows time to be kept in the event of a loss of power. This clock
may periodically require synchronization with time servers via NTP protocol.
Enabled: activate this option if you wish to use the NTP time servers.
NTP Server 1: IP address or DNS of time server 1
NTP Server 2: IP address or DNS of time server 2
Additional Notes.
- Once the configuration is finished, click "SAVE CONFIG" to save the changes. Remember
that the router should be restarted for the changes to take effect.
-
For firmware versions 2.05 or later, it is possible to specify the time zone. Previous firmware
versions uso UTC time only.
http://www.mtxm2m.com
Subject to changes without prior notice
User Manual ‐ Rel3.00.3.09
Page 69