Eptz Control Via Mouse - Dynamic CCTV EZ960 Osd Setup Manual

7.6

ePTZ Control via Mouse

Both in CMS and CMS Player, zoom in/out can be easily controlled via the
scroll wheel of the mouse. Either in CMS or CMS Player, click on any grid that
users wish to zoom in viewing area. Move the scroll wheel away from users to
zoom in and the screen will show like the following picture.
On the upper left-hand corner will show zoom-in multiple. The maximum
multiple is X7. Also on the lower right-hand corner will show the position of
current viewing area, shown as an inner white rectangle, comparing with the
original screen, shown as an outer rectangle frame.
In addition, the viewing area can be dragged and moved by left clicking and
holding the mouse while moving. On a zoomed-in screen, the mouse pointer
will change to
to indicate that the image is dragged.
and when the mouse is clicked the pointer will become
NOTE: This function is not available in Dome Camera Control mode.
Scrolling the wheel of the mouse will zoom in/out the camera lens of
the dome camera.
NOTE: This function will use up a lot of CPU resources. It is
recommended not to open too many programs at the same time to
avoid crash of CPU.
User's Manual
121