Cms Operator Log - Dynamic CCTV EZ960 Osd Setup Manual

User's Manual
Step 2. Choose a destination folder to save the file. Then a window will pop
Step 3. When the download is completed, the installation of the new version
Manual Software Upgrade
To manually upgrade software, click on <CMS Software Upgrade>. Then
follow the same steps listed above to complete the download and installation.
6.7.4

CMS Operator Log

The step by step operation of CMS will be recorded by CMS operator log.
Select <CMS operator log> and the Log window will be displayed.
96
up and show the downloading status. Click <Abort> to terminate the
download and CMS will be started as usual.
of CMS can be started following the same procedures described in
section Software Installation.
NOTE: If the upgrade file is not completely downloaded, an
error message will be displayed to notify users.
NOTE: A release note will also be downloaded together with
the setup file. A popup window will be displayed to show the file
path where the release note is saved.