Ezrecord Setup - Dynamic CCTV EZ960 Osd Setup Manual

< ezRecord Setup >
This item aims to ease the complicated record settings, and to make the setup much easier.
Note that this item can be accessed only when <ezRecord> is selected as the option for
<Preset Config>.
Select <ezRecord Setup> from <Record Setup> and press ENTER, the menu is displayed
as below:
Follow these steps to Setup ezRecord:
 Select <How Many Days To Record> and press ENTER, then press UP/DOWN
to select a desired number of days. The average normal PPS & quality will be
adjusted automatically. The maximum recording days depends on the storage
size of the HDD. In other words, the larger the storage size, the more days the
DVR can record.
 Move to <Daytime Record> and press ENTER. This item is for users to select
whether the DVR will record during daytime. If yes, use UP/DOWN to select
<Yes> to enable daytime recording; or select <No> to disable.
 Repeat the same procedures for <Night Record> and <Weekend Record>,
respectively. Note that <Weekend Record> will be inaccessible if <Weekend
Schedule> in <Schedule Setup> is set to <OFF>.
 Select <Average Normal PPS> and press ENTER, then press UP/DOWN to
choose a desired number of PPS. The <How Many Days To Record> will be
computed automatically.
 Select <Average Normal Quality> and press ENTER, then press UP/DOWN to
select a desired quality. The <How Many Days To Record> will be computed
automatically.
How Many Days To Record
Daytime Record
Night Record
Weekend Record
Average Normal PPS
Average Normal Quality
NOTE: The current number of connected cameras will affect the
recording quality automatically calculated by the <ezRecord Setup>.
Therefore, when there are cameras disconnected or connected, the
<ezRecord Setup> should be reset.

ezRecord Setup

OSD Setup Manual
2 Days
Yes
Yes
Yes
3.75
Best
37