Select Channel; From / To Time; Select Events; Data Type - Dynamic CCTV EZ960 Osd Setup Manual

OSD Setup Manual
Sel
Set this item to <Yes> to set the selected device as the exporting destination.
NOTE: The item <Erase Disk> from Video Export menu will be grayed out
when the selected device is not a DVD+RW or when the device is not
selected yet.
< Select Channel >
The item is used to select channels for export. Move the cursor to the desired channel
using LEFT / RIGHT keys, select or de-select a channel by pressing ENTER.
< From / To Time >
These items are used to set the time which data export begins and ends. Move the cursor
using Direction keys, and press ENTER to select the date / time items; adjust the selected
date and time value by UP / DOWN keys.
NOTE: When the Start / End Time are set, remember to select the exporting Data
Type.
< Select Events >
Select the item to display the event list for exporting event video. Move the cursor to scroll
the event list and press ENTER to select the events users want to export.
NOTE: Users will not be allowed to access <Select Events> if <Data Type> is set to
<Normal>.
< Data Type >
This item is used to select exporting video type. The options are <Normal> (export normal
video only), <Event> (export event video only) and <Both> (export both normal and event
video).
NOTE: If users want to export selected event video using the item <Select Event>,
users have to set <From> and <To> to the same day and time. Otherwise, not only
the selected event video will be exported to the selected destination, but also other
event videos recorded during the period between <From> and <To>.
58