Appendix A - Installing A Battery - Lathem CT SERIES User Manual

Appendix A –
Installing a Battery
The CT series clock has an optional re-chargeable battery so the clock is
operational during a power failure. Once the power is restored the
battery will automatically re-charge.

Remove the cover from the battery compartment on the back of
the clock using a Philips head screwdriver.

Position the battery connector as shown.

Plug the battery connector into the clock connector.

Tuck the connector wires and battery into the battery
compartment, being careful not to pinch the wires.

Insert the cover into the slot and tighten the Philips head screw.
Note: Make sure the wires are not pinched when closing cover.
Appendix A – Installing a Battery  25