Lathem CT SERIES User Manual page 41


Tap Signal under the Relay Mode.

Tap Schedule under Signal Events. The Signal Event Schedule
screen will display with all the schedule events.

Tap on the desired event and make the needed changes.

Tap OK to save the changes.

When finished tap
Deleting a Bell Event

From the CT tap Settings and enter the administrator PIN and
tap OK.

From the Administrator Main Menu tap Signal-Door Access.

The Signal-Door Access screen will display.

Tap Signal under the Relay Mode.

Tap Schedule under Signal Events. The Signal Event Schedule
screen will display with all the schedule events.

Tap Delete and then Yes to remove the event.

When finished tap
to return to the default screen.
to return to the default screen.
 35