General Specifications; Softener Specifications - WaterSoft AS24P Installation And Operation Manual

Softener Specifications

General
Specifications
Grains Capacity / lbs.
Salt Per Regeneration
Grains Capacity / lbs. Salt Per Generation
with Vortech
Maximum Raw Water Hardness (grains)
Maximum Clear Iron/Manganese (ppm)
Cation Exchange resin (cu. ft.)
Mineral Tank (polyglass)
Brine Tank (polyethylene w/ grid)
Service Flow Rate (gpm)
Backwash Flow Rate (gpm) / Vortech
Space Required (D x W x H) in inches
Approximate Shipping Weight
Do NOT use Vaseline, oils, hydrocarbon lubricants or spray silicone anywhere! Petroleum base lubricants will
cause swelling of o-rings and seals. The use of other lubricants may attack plastic Noryl®. It is recommended that
Dow Corning® silicone grease be used as a lubricant for all control valves. Dow Corning® 7 Release Compound
is used in the manufacture of Chandler Systems control valves. (Part # LT-150)
Pipe dope and liquid thread sealers may contain a carrier that attacks some plastic materials. It is recommended
that Teflon® tape be used to seal plastic Noryl® threaded fittings.
AS24P AS32P
AS24VP AS32VP
DS24P DS32P
DS24VP DS32VP
32K / 15
24K / 12
30K / 12
19K / 6
22K / 6
24K / 7.5 32K / 9
50 75
3 5
0.75 1
8 x 44 9 x 48
18 x 33 18 x 33
7 8
1.5 / 1.2 2.0 / 1.5
18 x 26 x 51 18 x 27 x 55
88 lbs. 100 lbs.
WARNING
Lubricants
Sealants
AS48P AS64P
AS48VP AS64VP
DS48P DS64P
DS48VP DS64VP
48K / 23 63K / 30
44K / 18 59K / 24
33K / 9 44K / 12
48K / 15 64K / 18
100 100
5 5
1.5 2
10 x 54 12 x 52
18 x 33 18 x 33
10 12
2.4 / 2.0 3.5 / 2.4
18 x 28 x 61 18 x 30 x 59
133 lbs. 164 lbs.
3