Specifications - Sony BKM-256DD Instructions For Use Manual

Specifications

General
Voltage +3.3 V, +5 V (supplied from the
main unit)
Power consumption
Approx. 2 W
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Optimum temperature
20 °C to 30 °C (68 °F to 86 °F)
Humidity 0% to 90% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature –20 °C to +60 °C (–4 °F to
+140 °F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Maximum external dimensions (w/h/d)
100 × 20 × 154 mm
(4 × 13
Mass Approx. 250 g (8.8 oz)
Input/Output connectors
DVI-D input/output
DVI-D 24-pin connector (2)
Available signal format
Refer to the instructions for use of the monitor.
Signal characteristics
DVI-D signal
Single-link TMDS compatible
Compliance with DVI Revision 1.0
Notes
• DVI-A and DVI-I signals are not compatible
with this unit.
• DVI-D dual-link signal is not compatible
with this unit.
Note
Depending on the SCAN setting of the
monitor, part of the displayed picture may not
appear.
/16 × 6 1
/8 inches)
Supplied accessories
Instructions for Use (1)
European Representative (1)
Design and specifications are subject to change
without notice.
Note
Always verify that the unit is operating
properly before use. SONY WILL NOT BE
LIABLE FOR DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT
ON ACCOUNT OF THE LOSS OF
PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER
REASON WHATSOEVER.
7
Specifications