Connecting A Camcorder, Games Console, Etc - Onkyo TX-NR901 Instruction Manual

Using the Remote Controller with Other Components—Continued
Deleting Remote Controller Modes
You can delete remote controller modes that you don't
need, such as modes for components that you don't have.
The AMP mode cannot be deleted.
1 Press and hold the [CUSTOM]
button for more than three sec-
onds.
The remote controller enters Custom
mode.
2
Roll the scroll wheel to select
MODE, and then press the scroll
wheel.
3
Roll the scroll wheel to select
DEL, and then press the scroll
wheel.
4 Roll the scroll wheel to select the
mode you want to delete, and
then press the scroll wheel.
If the mode is deleted successfully,
after "OK" has been displayed, the
DEL display (step 3) reappears.
98
Assigning Remote Controller Modes
With this function you can assign a remote controller
mode to an input source. This is useful when you con-
nect, say, a CD recorder to the TAPE IN/OUT sockets. In
this case it's convenient to assign the remote controller's
CD mode to the TAPE input source.
1
Press and hold the [CUSTOM]
button for more than three sec-
onds.
The remote controller enters Custom
mode.
2
Roll the scroll wheel to select
MODE, and then press the scroll
wheel.
3
Roll the scroll wheel to select
ASSIGN, and then press the
scroll wheel.
4
Roll the scroll wheel to select the
mode you want to assign, and
then press the scroll wheel.
5 Roll the scroll wheel to select the
input source you want to assign
to the specified mode, and then
press the scroll wheel.
If the assignment is successful, after
"OK" has been displayed, the ASSIGN
display (step 3) reappears.