Onkyo TX-NR901 Instruction Manual page 30

Using the Remote Controller with Other Components—Continued
Naming Macros
You can name your macros as follows. Names may con-
tain of up to five characters.
1
Press and hold the [CUSTOM]
button for more than three sec-
onds.
The remote controller enters Custom
mode.
2 Roll the scroll wheel to select
MACRO, and then press the
scroll wheel.
3
Roll the scroll wheel to select
NAME, and then press the scroll
wheel.
4
Roll the scroll wheel to select the
number of the macro that you
want to name, and then press the
scroll wheel.
5 Roll the scroll wheel to select a
character, and then press the
scroll wheel to set it.
The following characters are available.
0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J
K L M N O P Q R S T U V W X Y Z + –
= < > _
96
Macro #1 selected
1st character
_
/ space
1st character set
6 Repeat step 5 until you've
entered all 5 characters.
The previous menu reappears.
If the name you are entering consists of
less than five characters, enter spaces at
the end to make it up to five.