How To Use - Breville VKJ137 Instructions For Use Manual

1 Plug the kettle into a suitable power outlet. Ensure that the On/Off switch
is in the Off (up) position.
2 Remove the kettle from the power base and open the lid by depressing
the lid release button.
3 Observe the maximum level indicators marked on the water gauges to
prevent over filling. Fill the kettle with no more than the maximum amount
of water, and always ensure that there is sufficient water in the kettle for it
to operate correctly. This is approximately 250ml or 1 tea cup full.
4 Close the lid fully to ensure safe operation of the kettle.
! ! ! ! !
WARNING
If this product is filled above the max. level, hot water may be ejected.
✎ ✎ ✎ ✎ ✎
NOTE
To ensure that the kettle is not overfilled, always check the water level with the
kettle positioned on its power base.
5 Ensure the kettle is correctly seated on the power base. Switch the kettle
on by pressing the On/Off switch down. The internal chamber of the kettle
will illuminate blue and the water will start to boil.
When the water reaches boiling point it will automatically switch off and
the blue illumination will also turn off.
✎ ✎ ✎ ✎ ✎
NOTE
You can always manually switch off the kettle by switching the On/Off switch to
the Off (up) position.
6 Always ensure the kettle is switched off before removing or replacing onto
the base unit.

HOW TO USE

4