Table of Contents
Advertisement
CONNECTION TO THE MAINS SUPPLY
When using electrical appliances, basic safety precautions should always be
followed.
! ! ! ! !
WARNING
THIS APPLIANCE MUST BE EARTHED
This appliance is fitted with either a moulded or rewirable BS1363, 13 amp plug.
The fuse should be rated at 13 amps and be ASTA approved to BS1362.
If the fuse in a moulded plug needs to be changed, the fuse cover must be
refitted. The appliance must not be used without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and removed from the supply
cord and an appropriate plug fitted as detailed below. If you remove the plug it
must not be connected to a 13 amp socket and the plug must be disposed of
immediately.
The wires of the mains lead are coloured in accordance with the following code:
GREEN/YELLOW = EARTH
The wire which is coloured GREEN/YELLOW must be connected to the terminal
in your plug which is marked with an E or by the earth symbol ( ) or coloured
GREEN or GREEN/YELLOW.
The wire which is coloured BLUE must be connected to the terminal in your plug
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in your
plug which is marked with the letter L or coloured RED.
If any other plug is used, a 13 amp fuse must be fitted either in the plug or
adaptor or at the distributor board.
Plug should be BS1363 approved
Fit a 13 Amp fuse
GREEN/YELLOW
(Earth)
BLUE
(Neutral)
Ensure that the outer sheath of the cable
is firmly held by the clamp
BLUE = NEUTRAL
13 Amp
fuse
BROWN
(Live)
10
BROWN = LIVE
Advertisement
Table of Contents
