Sony DFW-V500 Manual page 12

DFW-V500
DFW-VL500
FUNCTIONS
Brightness
The brightness of images can be controlled by changing the black level setting. Adjust the brightness if the appropriate
gradation cannot be obtained due to the blurring of the black portions of the image.
When maximum value of Y output data is 255
Command setting
----------------------------------------------------------------------------
00h
80h
FFh
Gamma
Used for setting gamma compensation to ON or OFF.
ON : For obtaining natural gradation taking into account the characteristics of the monitor.
OFF (1) : Outputs CCD signals for image processing linearly according to the sensitivity when Gamma is ON.
OFF (2) : Outputs CCD signals for image processing linearly. The sensitivity drops, but the dynamic range increases
from OFF (1).
Sharpness
Used for adjusting sharpness of the image.
White Balance
Used for adjusting white balance by adjusting R-gain and B-gain. White subjects can be shot in white by setting the white
balance according to the color temperature of the luminance light. The White Balance operation mode can be selected from
three modes – Manual, One Push, and ATW.
10
Y output value (full black level)
0
1
50
These values are approximate values and may differ
according to the adjusted state of the camera.
Gamma OFF (1)
Gamma ON
Gamma OFF (2)
Input
Concept of Gamma Characteristics