Epson PowerLite 5510 User Manual page 189

On/Standby Status light Lamp
(power) light
Flashing blue Varies
Flashing blue Varies
Flashing blue Varies
Varies Varies
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related concepts
Air Filter and Vent Maintenance
Projector Lamp Maintenance
Related references
Projector Setup Settings - Extended Menu
Where to Get Help
Temp Filter light Status and solution
light light
Varies Flashing Varies
orange
Flashing Varies Varies
orange
Varies Varies Orange
Varies Varies Flashing
orange
189
High temperature warning. If the
temperature gets too high,
projection will automatically stop.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• Clean or replace the air filter.
The lamp is past its replacement
period and needs to be replaced
to avoid damage. Do not continue
using the projector.
Low air flow through the air filter.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug
the projector and contact Epson
for help.
It is time to clean the air filter.