Table of Contents
Advertisement
Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the
Auto button on the remote control.
To change settings for an input source, make sure the source is connected and select that source.
Setting
Resolution
Aspect
Tracking
Sync.
Position
Auto Setup
Options
Auto
Normal
Wide
Manual
See the list of available aspect
ratios
Varying levels available
Varying levels available
Up, down, left, right
On
Off
151
Description
Sets the input signal resolution
from an analog RGB computer
connection
Auto: detects the resolution
automatically
Normal: for 4:3 or 5:4 screens
Wide: for widescreen
Manual: allows you to specify a
resolution
Sets the aspect ratio (width-to-
height ratio) for the selected input
source
Adjusts signal to eliminate
vertical stripes in images from an
analog RGB computer
connection
Adjusts signal to eliminate
fuzziness or flickering in images
from an analog RGB computer
connection
Adjusts the image location on the
screen
Automatically optimizes image
quality from an analog RGB
computer connection (when On)
Advertisement
Table of Contents
