Epson PowerLite 5510 User Manual page 187

On/Standby Status light Lamp
(power) light
Blue Blue
Blue Flashing
blue
Flashing blue Off
Off Flashing
blue
Off Flashing
blue
Off Flashing
blue
Temp Filter light Status and solution
light light
Varies Off Off
Off Off Off
Off Off Off
Flashing Off Off
orange
Off Flashing Off
orange
Off Orange Off
187
Normal operation.
Cooling down. All control panel
buttons are disabled.
Preparing for network monitoring
or shutting down.
Internal error. Turn off the
projector, unplug it from the
electrical outlet, and contact
Epson for help.
A fan or sensor has a problem.
Turn the projector off, unplug it,
and contact Epson for help.
Projector has overheated and
turned off. Leave it turned off to
cool down for five minutes.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug
the projector and contact Epson
for help.