On/Standby
Status light Lamp
(power) light
Off
Flashing
blue
Off
Flashing
blue
Off
Flashing
blue
Off
Flashing
blue
Temp
Filter light Status and solution
light
light
Orange
Off
Off
Off
Off
Orange
Flashing
Flashing
Off
orange
orange
Orange
Orange
Off
188
Lamp has a problem.
• Check to see if the lamp is
burned out, broken, or installed
incorrectly. Reseat or replace
the lamp as necessary.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug
the projector and contact Epson
for help.
Low air flow through the projector.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug
the projector and contact Epson
for help.
Auto Iris error. Turn off the
projector, unplug it from the
electrical outlet, and contact
Epson for help
Power error (balast) or Lens Shift
error. Turn off the projector,
unplug it from the electrical outlet,
and contact Epson for help