Operation Instructions - koppel ERA series Owner's Manual

Operation Instructions

FEEL mode operation procedure
FEEL mode automatically selects the operation mode(DRY,FAN,COOL) depending on
the current room temperature .
With the remote controller pointing toward the air conditioner.
Turning on
Press button. When the appliance receives the
ON/OFF
signal, the RUN indicator of the indoor unit lights up.
When the unit is not at FEEL mode.
Selecting FEEL mode
Press the MODE select button repeatedly until the mode indicator
on the display points at FEEL mode.
Operation mode and temperature are determined by indoor temperature
Indoor temperature Operation mode
Less than 20
20 ~26
Over 26
Air temperature adjustment is possible even during FEEL operation.
There are 4 levels of adjustment possible with the
the button.
Setting temperature
Press the button or the
When the button is pushed,the temperature will increase 1
After temperature will increase 2 ,the indicator will not change.
When the button is pushed,the temperature will reduce 1
After temperature reduce 2
NOTE NOTE
There will be a delay when mode
is changed during the operation,as air
might not get blown out.
6
Target temperature
23
Fan
DRY
18
COOL 23
button or
button.
,the indicator will not change.
1
SLEEP TIMER ON
FEEL
COOL
DRY
FAN
HEAT
2
SLEEP
TIMER
MODE
2 2
.
.
If you don't like the content of FEEL mode operation,
shift to DRY,COOL or FAN mode.
TMIER OFF
AUTO
HIGH
MID
LOW
SWING
FAN
SWING
ON/OFF
1
3