Remote Controller - koppel ERA series Owner's Manual

Remote Controller

Remote Controller
The remote controller transmits signals to the system.
ON/OFF button
Used to start and stop operation .
TIMER button
Used to select TIMER operation.
UP button
Used to increase the set room temperature (16
and time(0.5~24h).
DOWN button
Used to decrease the set room temperature and time.
SLEEP button
Used to set or cancel sleep operation.
It includes normal-SLEEP(
able -SLEEP( ),but Comfortable-SLEEP
optional.
SWING control button
Used to adjust airflow direction.
FAN SPEED control button
Used to select the indoor fan motor speed:
Auto( or ), High(
Mid( or ) and Low(
This function is invalid in sleep mode.
MODE button
Used to select the type of operation mode: FEEL(
COOLING( ), DRY( ), FAN(
( Only for Heat Pump). FEEL mode can select the operation
mode such as COOL,DRY,FAN,HEAT automatically depending
on the room temperature.
Note: Each mode and relevant function will be further specified in following pages.
~31
)and Comfort-
is
or ),
or ).
),
) AND HEATING
SLEEP TIMER ON TMIER OFF
FEEL
COOL
DRY
FAN
HEAT
)
5
SLEEP
2
TIMER
8 MODE
4
AUTO
HIGH
MID
LOW
SWING
3
7
FAN
6
SWING
1
ON/OFF
4