Mlbv-40 Log Placement - Lennox MLBV-35NM Installation Instructions Manual

LENNOX HEARTH PRODUCTS • MERIT
1
4
Left Cross Log
2
Left front Log
Fit onto left rear log bracket
1
and rear bar of grate.
Volcanic Stone
Glowing Embers
(Do not place glowing embers over burner openings.)
NOTE: Install volcanic stone and glowing embers FIRST.
Step 1. Fit bottom slots of Rear Log (1) onto left rear log bracket
and rear bar of grate.
Position over Rear Log (1)
4
and against front bar of grate.
2
Step 4. Place Left Cross Log (4) over Rear Log (1); then fit
the bottom slot over the center front bar of grate.
Figure 24
SERIES B-VENT GAS FIREPLACES • MODELS MLBV-35, MLBV-40 • INSTALLATION INSTRUCTIONS
®
MLBV-40 LOG PLACEMENT INSTRUCTIONS
Rear Log
5
Right Cross Log
3
Right front Log
Right Rear Log Bracket
Grate
1
3
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Note:
• Ceramic fiber logs are FRAGILE! Handle carefully to prevent breakage.
• Install volcanic stone and glowing embers BEFORE installing logs.
• To prevent sooting, make sure logs do not cover any burner openings.
MLBV firebox Accessories/Parts
Cat. No. Model No.
H7667 — MLBV-40 Log Set Assembly
88L53 fGE Bag of Glowing Embers (Rockwool)
80L42 fdVS Bag of decorative Volcanic Stone
2 Position against left front corner of grate.
1
Step 2. Fit bottom slots of Left front Log (2) onto left front
corner of grate.
Step 3. Fit bottom slots of Right front Log (3) onto right front
corner of grate.
Position over Right Front Log (3);
5
then fit onto right rear log bracket.
4
2
Step 5. Place Right Cross Log (5) over and behind Right Front
Log (3); then fit the bottom slot onto the right rear
log bracket.
description
Position against right front
3
corner of grate.
1
3
19