Log Placement - Lennox Signature LSS-40CP Homeowner's Care And Operation Instructions Manual

Log Placement

WARNING: LOGS GET VERY HOT AND
WILL REMAIN HOT UP TO ONE HOUR
AFTER GAS SUPPLY IS TURNED OFF.
HANDLE ONLY WHEN LOGS ARE COOL.
TURN OFF ALL ELECTRICITY TO THE
APPLIANCE BEFORE YOU INSTALL
GRATE AND LOGS.
WARNING: THE SIZE AND POSITION ON
THE LOG SET WAS ENGINEERED TO GIVE
YOUR APPLIANCE A SAFE, RELIABLE
AND ATTRACTIVE FLAME PATTERN.
ANY ATTEMPT TO USE A DIFFERENT
LOG SET IN THE FIREPLACE WILL VOID
THE WARRANTY AND WILL RESULT IN
INCOMPLETE COMBUSTION, SOOTING,
AND POOR FLAME QUALITY.
WARNING: THIS APPLIANCE IS NOT
MEANT TO BURN WOOD. ANY AT-
TEMPT TO DO SO COULD CAUSE IR-
REPARABLE DAMAGE TO YOUR APPLI-
ANCE AND PROVE HAZARDOUS TO
YOUR SAFETY.
Carefully position the ceramic fiber logs over
the burner as shown in Figure 9 (LSS-35) or
Figure 10 (LSS-40) . For more detailed place-
ment instructions, refer to the LOG PLACE-
MENT GUIDE accompanying this document.
Proper log placement is critical to prevent
sooting. Logs should be placed in the gaps
between the flame peaks and should be posi-
tioned so that at no time they impinge the
flames.
10
Figure 9
Figure 10
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
MODEL LSS-35
MODEL LSS-40