Set Up Device Pairing With Built-In Bluetooth Adapter - ACS ACR3901U-S1 User Manual

4.2. Set up device pairing with built-in Bluetooth adapter

Note: This procedure only applies to Windows 8 and later. Windows 7 does not support devices using
Bluetooth 4.0/Bluetooth Low Energy interface.
To pair using this setup:
1. Enable the Bluetooth mode of ACR3901U-S1 to make it discoverable. To do this, slide the
toggle switch to the right.
2. Go to PC Settings
3. Turn on Bluetooth.
ACR3901U-S1 – User Manual
Version 1.01
, choose PC and devices, and then click Bluetooth.
Page 26 of 34
info@acs.com.hk
www.acs.com.hk