Subscribe to Our Youtube Channel
Related Manuals for ACS ACR3901T-W
Summary of Contents for ACS ACR3901T-W
- Page 1 ACR3901T-W ACR3901T-W Test Manual V1.00 Name Signature Date Prepared by: Keith Mo 2017-07-17 Reviewed by: Approved by: Subject to change without prior notice info@acs.com.hk www.acs.com.hk...
- Page 2 PC & USB Mode loopback program “ESD4.exe” Test Procedure: 1. Insert the “ACOS3” test card into the ACR3901T-W reader. 2. Plug the ACR3901T-W reader into PC through USB cable 3. The Green LED is blinking and the reader is in USB mode.
- Page 3 The test program needs “Visual Basic 6.0 run time files” on PC, if “ESD4.exe” cannot be opened, please install “vbrun60sp5.exe” first under the folder “TestProgram\USB_Mode\”. 5. Press “Initialize” button to search the smart card reader. ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 4 ACS ACR3901U ICC Reader 0” will display 6. Press “TEST” button to start testing. 7. The test program is running. ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 5 ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 6 8. When the testing is finished, press “Quit” button to stop and end the program. 9. Unplug the reader. ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 7 2.0. Bluetooth Mode Loopback program This section introduces ACR3901T-W Reader using in Bluetooth Mode. (It can connect USB adapter to charge the battery inside the reader) Tools Requirement: a. ACR3901T-W reader b. ACOS3 Card c. Bluetooth 4.0 USB Adaptor Dongle d.
- Page 8 5. “Device initialization successfully completed!” will be shown if success. 6. Insert the “ACOS3” test card into the ACR3901T-W reader. (Open the back casing and then insert the test card) 7. Press the button to turn on the reader and enter Bluetooth mode. The Blue LED is blinking and the reader is in pairing mode.
- Page 9 8. Press the “Scan” button to scan the Bluetooth device. 9. The corresponding reader information will be scanned as the following. 10. Select the ACR3901T-W reader (eg, ACR3901T-W-001001) and then press “Start” to connect the reader in Bluetooth mode. ACR3901T-W Test Manual info@acs.com.hk...
- Page 10 11. The card testing program is started. 12. The reader is sending and receiving command as below window. The Blue LED is blinking very fast. ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 11 13. After finished the test, press “Stop” to stop the card testing. 14. Press “Disconnect” to disconnect the bluetooth connection of the reader. ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 12 15. Close the testing program. 16. “Holding” the button for around 5 seconds to turn off the reader. Or press the button at the back to reset the reader. ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 13 2. At Computer icon, right click on “Computer” select “Properties” 3. Select “Device Manager” 4. Check Smart card reader, use the mouse to right click “ACR3901U ICC Reader”, and select “Update device software…” ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 14 5. Select “Browse my computer for driver software” ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 15 6. Press “Browse” and select the unziped USB Mode driver under the path: “\TestProgram\USB_Mode\USBModeDriver” 7. Press “Next”to install the driver. 8. The security window may popup and asks to confirm installation. Press “Install” ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 16 9. When the driver has finished installation, Press “Close” 10. In device manager, user could check the reader driver with name “ACR3901U ICC Reader” is ready. ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 17 1. Insert the Bluetooth Adaptor into PC, then the PC will automatically popup the driver software installation window, wait that the driver will not successfully installed, press “Close”. 2. Mouse move to Computer, right click on “Computer” select “Properties” 3. Select “Device Manager” ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 18 4. Check “Other devices”, use the mouse to right click “Unknown device”, Select “Update device software…” 5. Select “Browse my computer for driver software” ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 19 6. Press “Browse” and select the Bluetooth adaptor driver “ccxxxx_usb_cdc.inf”under the following path: \ACR3901T-W_TestProgram\BT_Mode\AdaptorDriver\ccxxxx_usb_cdc.inf 7. Press “Next”to install the driver. 8. It the windows security warning message shows as below，select “Install this driver software anyway”to continuous the installation. ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 20 Bluetooth adaptor. As the example below, the assigned com port is COM8. Press “Close” to finish the installation. After driver installation successfully finish, user can check the assigned com port again from “Device Manager” ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
- Page 21 FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ACR3901T-W Test Manual info@acs.com.hk www.acs.com.hk Version 1.00...
Need help?
Do you have a question about the ACR3901T-W and is the answer not in the manual?
Questions and answers