Introduction; Safety Compliance - Hayter Spirit 41 617J Owner's Handbook Manual

INTRODUCTION

Thank you for purchasing a Hayter mower. The following pages are designed to help you gain
safe and effi cient service from your machine.
IMPORTANT: This 'Owners Handbook' should be regarded as part of the mower as it gives
essential information regarding mower safety, operation, maintenance and specifi cations.
Read and understand this handbook prior to operating your mower for the fi rst time. Make
sure you are familiar with all the controls and points of regular maintenance. If you have
any doubts, consult your local Hayter authorised dealer who will be pleased to give you
assistance.
IMPORTANT: This mower is designed solely for use in a domestic grass cutting
environment. Use in any other way is considered as contrary to the intended use. Compliance
with and strict adherence to the conditions of operation, service and repair as specifi ed in this
handbook also constitute essential elements of the intended use.
This mower should be operated, serviced and repaired only by persons who are familiar with
its particular characteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed in this handbook and all other generally recognised regulations
on safety must be observed at all times.
Use of non standard parts or any arbitrary modifi cations carried out on this machine may
relieve Hayter Limited of liability for any resulting damage or injury.
Hayter mowers are robustly constructed and designed for effi cient economical performance
under normal mowing conditions. Correct operation and maintenance will ensure a long and
satisfactory service life. Prior to despatch from our factory every effort is made to ensure that
your mower is delivered in perfect condition.
Throughout this handbook all references to left and right are as viewed from behind the
handlebar, in the direction of forward travel.
This handbook is based on information available at the time of publication.
HAYTER LIMITED reserve the right to amend product specifi cations without prior
notifi cation.
Please be advised that the illustrations in this Handbook are generic and not specifi c to your
product.
For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk

SAFETY COMPLIANCE

To ensure low noise and vibration levels, carry out the following procedures correctly:
• To prevent overloading the engine, use the correct height of cut and ground speed (where
applicable).
• Follow the recommended maintenance instructions.
• Do not use your mower for prolonged periods of time.
• Always wear hearing protection.
VIBRATION INFORMATION
Hand / Arm Vibration Level at the Operator Position measured in accordance with European
Standard EN ISO 5395:2013.
Measured Vibration Level ahw
Uncertainty of measurement K
SOUND PRESSURE INFORMATION
Sound Pressure Level at the Operator Position measured in accordance with European
Standard EN ISO 5395:2013.
Measured Sound Pressure Level LpA
Uncertainty of measurement K
SOUND POWER INFORMATION
Sound Power Level measured in accordance with European Standard EN ISO 5395:2013.
Measured Sound Power Level LwA
Uncertainty of measurement K
3
RELEASED Ver-A.0 ©Toro 2015
617 619
6 ms -2 6 ms -2
3 ms 3 ms
-2 -2
617 619
84 dB (A) 84 dB (A)
2 dB (A) 2 dB (A)
617 619
93 dB (A) 93 dB (A)
3 dB (A) 3 dB (A)