Configuration Commands
tr69cfg
tr69cfg
Cisco RV34xx Router CLI Reference Guide
Default Configuration
None.
Example
The following example displays the lanhosts show all command.
router06000a>lanhosts show all
lanhosts show vlanX
To show the lanhosts vlan ID, use the lanhosts show vlanX command.
Parameter
lanhosts show vlanX - Enter lanhosts show vlanX.
Default Configuration
None.
Example
The following example displays the lanhosts show vlanX command.
router06000a>lanhosts show vlan88
The tr69cfg command manages the application layer protocol. The tr69cfg
commands executed on the command line generate status information regarding
tr69cfg processes, or are used to stop and start specific tr69cfg services. All the
tr69cfg commands are listed here:
•
tr69cfg {enable | disable}
•
tr69cfg modify --interval informinterval --acsurl acsurl --acsuser
acsuser --acspwd acspwd --cruser connrequser --crpwd connreqpwd
•
tr69cfg show
4
27