Manual Setup - D-Link mydlink Smart Plug Lite User Manual

Section 2 - Installation

Manual Setup

You must connect wirelessly to the Smart Plug. Do not close this app.
On your device, go to Settings > Wi-Fi. Select the network called
DSP-W110-xxxx (where xxxx is the last 4 digits of the MAC address).
Note: For the exact network name (SSID), refer to the Quick Install card that
came with the product.
Tap Next to continue.
Enter the PIN code and tap Next.
This code is located both on the back of the Smart Plug and the Quick
Install card.
D-Link DSP-W110 User Manual 10